SkyHolic - 20Amp Brushless ESC

Length :  36mm (1.4in)

Width  :  24mm (0.95")

Height  :  9mm (0.37")

Weight :   14g  (5 oz)

¡¡

¡¡

For Unparalleled Sensorless Brushless Performance

- Automatically selects cutoff voltage for 2 to 3 cell Li-Po batteries (6V/9V)

- Automatically sets correct motor timing

- Safe power on mode prevents accidental stars

- Programmable braking (on/off)

¡¡

You must always use a fully charged battery pack in order to ensure proper cutoff

voltage is selected. Once a battery pack has been partially discharged and unplugged

from the ESC, reconnecting it before fully recharging the pack may result in the

incorrect voltage cutoff being selected, potentially causing damage to the pack.

¡¡

Servo Ratings with BEC Enabled

¡¡

If you wish to disable the BEC (required if you¡¯re using more than 10 cells), you must

first remove the red receiver wire and then insulate properly to prevent shorting.